Juno JSV2541 Manual do Utilizador descarregar pdf (Página 17)

Symptom Fault code Solution

The machine will not start ■ The door has not been properly closed.

■ The plug is not properly inserted in the

power socket.

■ Check the plug fuse.

■ There is no current at the socket.

The machine does not fill "Vorspül" ■ Ensure the water tap is open.

with water programme light ■ Ensure the mains water supply has not

flashing very fast been cut off.

■ The inlet hose may be squashed or bent.

Reposition the hose.

■ The inlet hose may be blocked.

Switch off the water supply, and clean

the filter.

The filters are blocked "Intensiv 65°" ■ Clean the filters, refer to “Maintenance

programme light and cleaning”.

flashing very fast ■ The spray arms are not rotating. Ensure

the crockery is loaded correctly.

The dishwasher will not drain "Quick 55°" ■ The drain hose may be squashed or

programme light bent.

flashing very fast Reposition the hose.

■ The sink may be blocked. Clear any

blockages.

■ The drain hose extension is not correct.

Follow the instructions for connecting to

the waste.

■ There is no vent in the end of the drain

hose.

General "Normal 65°" or ■ Switch off the dishwasher.

"Eko 55°" programme Switch it back on and start the

light flashing programme.

very fast If the alarm reappears, call the local

Service Force Centre.

The machine is noisy ■ Dishes are rattling against each other,

refer to “Loading your machine”.

■ The spray arms are knocking against the

dishes. Refer to “Loading your machine”.

The door is difficult to close ■ The dishwasher is not level, or not

properly built-in.

Something not working

PSN13GB

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily

without calling out an engineer. Before contacting your local Service Force Centre, please carry out the

checks listed below.

The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the

cause of any problems.

If the “End of programme” indicator light on the control panel is off and you see the following signals:

In case of a fault, carry out the suggested corrective action, switch off the dishwasher, switch back on

and start the wash programme. If the fault code reappears, contact your local service Force Centre.

ENGLISH

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 26 27

Comentários a estes Manuais

Sem comentários

Juno JSV2541 Manual do Utilizador Página 17

Comentários a estes Manuais

Manuais e produtos relacionados com Máquinas de lavar loiça Juno JSV2541